is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Build a Disc Golf Basket

how to build a disc golf basket

One of the most enjoyable parts of playing disc golf is getting the disc to the basket and scoring the way you want it. But to do that consistently, you must improve your ability and overall skills through spending time on the course and practicing regularly. You can also practice at home by learning how to build a disc golf basket and use it to improve your form and overall skills.

But how to make your own disc golf basket? What are the materials you need in making a Do-It-Yourself disc golf basket right in the comforts of your home? These two questions and other queries on building a disc golf basket will be answered in this article. We will be providing information to make disc golfers equipped with the proper knowledge to create a disc golf basket the right way.

How to Make a Portable Disc Golf Basket

There are three main parts to every disc golf basket. The first one is the pole and the main basket, while the second part is the chain. The last part is the frame and the lower basket. Each of the parts has different dimensions that you need to follow to fit the standard measurement of the PDGA.

Disc Golf Basket Dimensions


For a basic disc golf basket, the rim must be around 21 ⅓ inches wide, and the chain must not be lower than the 22 inches below the rim. The lower basket should be 25.7 inches wide with a height of 6.7 inches. Also, a basic disc golf basket will have less the 18 chains installed.

For the standard disc golf basket, the measurement and dimension are similar to the basic one but contains more than 18 chains. This disc golf basket also uses durable materials in its foundation.

Meanwhile, the champion level basket is used by top-tier tournaments and approved by the PDGA. They have similar measurements and dimensions with the inferior type but use high-quality materials.


How long are the chains on a disc golf basket? As per the PDGA, the minimum chain length is 9 inches, but if you are making a DIY type, you can have the option to have more. The minimum number is 12 pcs. But I have seen as high as 24 chains for a disc golf basket.

The governing body has not set any standard for its size and thickness, but the choice should be up to you. Always remember that the quality of the chain will impact your experience during gameplay.


As per the PDGA, a disc golf basket should be 52 inches above the ground, and the distance from the floor towards the lower basket is 25.7 inches. Although, during competition, tournament rules may change depending on the preference of the organizers. The tournament director can also add obstacles along the course if needed.


The upper basket is 21.3 inches wide, while the lower basket must be at 25.7 inches. However, there are many varieties and sizes for the width, especially with the DIY type.


The PDGA does not have a standard weight for the disc golf basket but advises that the basket should weigh from 18 to 25 kilos. This action is to ensure that the foundation is stable when installed on the course.

How to Make your Own Disc Golf Basket

how to make a portable disc golf basket

When making a DIY disc golf basket, you need the following materials:

  • Round steel bar
  • Flat steel
  • Conduit Bender
  • Metal conduit
  • Enamel black fence post
  • Coil chain
  • Duct clamp
  • Hose clamps
  • Allied tube and conduit
  • Post cap

Step 1: Center Post Cutting and Assembly

The exact measurements for the center post will all depend on your preference. You can follow the one that I mention earlier in this article as your basis for the height of the center post. Once you already have your standard measurement, cut the round steel bar, flat steel, and the fence post according to their measurement.

Step 2: Disc Golf Basket Legs Assembly and Bending

For the disc golf basket legs, the metal conduit will be cut into 4 pieces and bent using the conduit bender into 90 degrees angle. The 4 pieces of metal conduit must fit into the bottom of the fence post once it is inserted. It will not be welded because it will allow them to rotate and adjust quickly once installed in an uneven disc golf course.

Step 3: Welding the Baskets

The goal is composed of two baskets which will be attached to the center post. Each of the two baskets will have the round steel bar and the flat steel as the primary materials. The rounded steel bar will be bent and turn into an “S” shaped and will be used as the foundation of the structure of the top ring and the lower basket. The flat steel bar will serve as the halo ring and will be welded to the bent ¼ inches steel rod.

Using the MapPro Torch, the rods will be heated in some areas to make them soft and eventually be bent over as planned. One side of the “S” steel rod will be installed on the center post, while the other side will be welded with the halo ring.

Step 4: Attaching the Chains

The chain’s length will be your decision to make, but to cut it, you can use an angle grinder, hacksaw, or a Dremel tool, depending on your preference. The primary purpose of the chain is to stop the disc golf discs when they hit the goal while dropping it into the lower basket.

Make many holes on the halo ring of the upper basket, then attach the chains using the snap links. Meanwhile, the other end of the chain will be put together at the center of the post using a 5 inches hose clamp. This process aimed to make the goal appear like the real one found in the market. Meaning, it should easily catch the disc, similar to how a commercial basket catches the disc upon reaching the basket.

Step 5: Adding the Net to the Lower Basket

You all notice that I did not make a complete cage in the lower basket, which means I need to put a net below to catch the disc and keep it from falling into the ground. Of course, you can have the option to weld and form a metal grate, but that will use more time. So,m the easiest way is to use a small cargo net to do the job.

The advantage of using the small cargo net is it is easy to install, and it’s a lot cheaper instead of using additional metal rods. You can out the middle of the cargo net into the center post and adjust until you found the way into the lower basket. If there are excess nets, you can cut them off then use zip ties to hold the net beneath the lower basket.

Step 6: Test it on the Outside

After the assembly process, the next thing is to test the finished product on the outside. You should note different factors that might affect your throws, such as the stability of the basket and its ability to catch the disc. Once you notice that there are things that need improvement, then you can adjust accordingly. If you feel that the legs are not providing a good foundation, you can always detach and adapt to their bending angle.

If you feel that it’s a little bit flimsy, you can constantly adjust and weld some more. But base on my personal experience, the DIY disc golf basket is sturdy enough to catch the disc with ease and does not move around a lot. But the most remarkable thing about this basket is that the legs can adjust and bend on the type of ground you’re on. You can quickly adapt and find the stability that you need.


Learning how to build a disc gold basket is an excellent skill to have as a disc golfer. The best thing about making your own is you will be the boss when it comes to the dimensions and measurement of all the main parts of the basket.

You can also practice your forms and throws right at the comfort of your home if you can build one in your backyard. Always remember that constant practice with your form or any other skills in the sport will come a long way in bringing your disc golf game into another level.

Leave a Comment